How to use your 4G Pulse Oximeter
Instructions
Use your device in a living room or a bedroom for an ideal cellular network. In case of battery replacement, use brand-new and unexpired Duracell batteries for optimal data transmission.
The pulse oximeter should not be used to monitor children.
It is not suitable for use on injured skin tissue
1. After opening the box, you will find your 4G Pulse Oximeter.
2. Open the battery compartment at the back of the device as shown below. Insert two AAA batteries in the dedicated slots. Put the battery compartment lid back
3. After inserting the batteries, press the lid on the left side of the OLED screen as shown below to open the clip. Position your finger in the rubber cushions of the clip and make sure your finger is in the right position. Release the lid to close the clip.
4. Press on the white button. Wait for a moment, the SpO2 value and PR value will be displayed on the OLED screen after the wave and measured values are stable as shown below. Do not move or remove your finger while the data is being calculated.
5. Once the data has been displayed on the screen, the cellular data transfer will begin automatically. Uploading will appear on the screen. Once your data is sent to your Care Manager, the device will display a "Goodbye" message and will be powered off automatically.
If you would like to do more, you can download our free app. Search for "CareSimple" on the "App Store" or "Google Play" store. With the app, you can communicate with your doctor, monitor your progress, view your care plan and more.